The sky’s the limit with Temperzone water-cooled systems.
Temperzone’s water-cooled technology combines the benefits of a water-cooled condenser with an air-cooled evaporator, delivering a level of performance that air-cooled units can’t.
Because they’re designed to fit into virtually any internal space or cavity, they’re ideal for high-rise buildings that prohibit the use of balcony units. The Water Cooled Package range of models gives you ultimate control and flexibility.
HWP Package Units
Cool only, Reverse cycle, Cooling with electric heat
Nominal Capacity Range (cooling): kW
3.5, 4.4, 5.9, 8.1, 9.9, 12.2, 14.7, 18.5, 21.2, 25.5, 27.5, 36.6, 44.5
Rather than having to plan your entire air conditioning layout in advance, Temperzone’s water-cooled modular technology offers you the unique ability to expand or adapt your system as a building’s commercial demands evolve.
Can be controlled by a third party device
Modbus or BacNet TCP/IP connection allows you to monitor a wide range of operational parameters, view fault logs and even take control of the unit.
EPOXY COATED COILS
Standard for added coil protection. Surpass 1000 hr salt spray test
Wide ESP range
Reduced water flow
ThermoShell® technology is Temperzone’s new high performance, compact heat-exchanger for refrigerant and water systems. ThermoShell® enables considerably lower water flow rates and water pressure drops to be accommodated by the system, with minimal effect on duty and efficiency. This leads to a reduction in hydronic equipment size, reducing capital and operating costs. Availible on models HWP36~275.
Water regulating valve control
The UC controller can operate a modulating water valve or a on/off shut off valve. The water regulating valve 0-10VDC reference can be provided directly from the UC controller in the HWP. The water regulating valve will be controlled to obtain an optimum condensing temperature providing a higher EER at varying air on conditions. Availible on models HWP36~275.
Epoxy Coated coils
All Temperzone units come standard with epoxy coated indoor and outdoor coils for added protection in harsh enviroments. For corrosive environments, varieties of lacquered fin stock have been developed as an alternative to the more expensive copper fin stock.
Of the various coatings, for aluminium fin stock, epoxy has emerged as the preferred coating as protection against both chemical and salt laden air corrosion.The controlled application of epoxy, to the aluminium fin stock, results in a highly corrosion resistant epoxy film of only 4-5 microns.
Temperzone's intuitive UC technology makes it easy The UC controller has many powerful features and is extremely flexible providing solutions that meet today's requirements. Some features include:
Availible on models HWP36~275.
- Water Valve Control
- Flush Cycle
- Pump Call
- Remote Start/Stop
- Temperzone thermostat connection
HWP models from 36~275 can be controlled by a BMS via modbus/RS485 port with multi-unit control capability. Up to 99 units can be connected on a common RS485 bus in daisy chain design
There are many benefits of BMS connectivity including the ability to monitor units from a PC, provide globall scheduloing and view faults and operational data.
Another benefit in some applications is the reduction of control cabling and installation of 3rd party BMS relay boards. The removal would provide substantial savings in captial costs and labour.